Rave Off Road
2022+ Tundra Marker Light Kit for Heritage / Pro Grille
2022+ Tundra Marker Light Kit for Heritage / Pro Grille
Couldn't load pickup availability
3D PRINTED SERIES
Our 3D printed series are the OG plug-and-play aftermarket marker light kit! The Rave Off Road Marker Light Kit adds 3 LED marker lights to the OEM TRD Pro grille in the 3 voids located at the top of the grill insert.
No bumper assembly removal required, simply remove the active grille shutter bolts near at the top, and reach underneath to install using our provided permanent automotive-rated mounting tape.
3D Printed Series Install Instructions
Lumens Per Module: 24
Total Current Draw: 0.06 Amps
Voltage: 12V
Beam Angle: 110°
Outer Housing: 3D Printed Black ABS
LED Lens: Clear
LED Color: Amber or Cool White
Operating Temperature: -4° to 122° F (-20° to 50° C) Operation outside these temperatures may damage the lights. If you live in extreme climates, we recommend using a dash switch instead of an add-a-fuse to ensure appropriate usage. We cannot warranty lights used outside of these temperatures.
IP Rating: IP65. In wet or humid environments water or condensation may enter the lens, but will not affect functionality of the LEDs. The LED modules will work even if moisture enters the inside of the lens. There is a bleed hole which will allow water to evaporate. Water or moisture inside the lens will not damage your truck, the battery, or electrical system. The circuit is protected by an in-line fuse (provided)
Additional Colors available, please reach out for a custom order.
Disclaimer: Please note that your traffic laws may not allow for legal use of non-standard colors while driving on the road. Buyer is responsible for adhering to local code. Non-standard colors are for off-road use only.
Original design and assembly by our team in Utah, USA.
INJECTION SERIES
Our injection series light kit offers higher moisture protection, a full lens housing, and maintains OEM style. These lights are a direct fit on our aftermarket trd pro grille. Although they have a loose fit on the OEM grille, they may be installed using 3M VHB permanent mounting tape or JB weld (not included) Please note that the injection series installation is different from the PDF above. Wiring is the same for both series.
Specs:
Lumens Per Module: 18
Total Current Draw: 0.04 Amps
Voltage: 12V
Beam Angle: 110°
Housing/Lens: Varies
LED Color: Varies
IP Rating: IP65 Rated & Moisture-sealed
Marker light returns or exchanges for purchasing the wrong style will incur a $15 restocking fee. Please thoroughly read all product details before making your purchase.
Share

















Have a question about this product?
Reach out directly using the live chat feature below or send us an email at contact@raveoffroad.com